Isn’t it great to get a rocking dose of music when you are rushing through waters ? Welcome to the world of jet ski speaker. In this article, we hand picked the best speakers for jet ski and reviewed them in details. We recently did a deep dive into the best jet ski sound systems and came up with this list. It has everything from features to design to power rating. Let’s begin.
Best Jet Ski Speakers [ 2020 List ]
We have handpicked 9 top jet ski speakers. Look at the below table to compare the products. To know more about the best jet ski speaker check the later section on detailed product review.
Let’s get started with more detailed product reviews.
BOSS Audio Systems MCKGB350B.6 Marine Receiver and Speaker Combo
Leading the competition among jet ski speakers is the MCKGB350B.6 receiver cum speaker package by BOSS Audio Systems. It comprises of an IPX6-rated marine-grade in-dash radio and a pair of weatherproof 6.5-inch speakers. The enclosures have UV protection and the circuit boards are conformal-coated. They are resistant to corrosion and rust.
The radio has a bunch of inputs for playing music from different devices. It has Bluetooth Audio Streaming and works with all Bluetooth-enabled gadgets. The system has a 3.5mm AUX input port for wired connectivity and a 1A USB port for charging connected devices. It also features front/rear switchable pre-amp outputs which can be used to expand the sound system.
You can add up to 2 amps and/or signal processors. There’s AM/FM radio too with an RDS tuner. The tuner is switchable. You can get reception of broadcasts in the US and Europe. Each of the two speakers has a 6.5-inch full-range marine driver with a polycarbon cone and rubber surrounds for added protection from the elements. The radio has an internal amp that drives the speakers. Max power (per pair) of the amp is 180 watts and RMS power is 90 watts. The receiver has built-in EQ settings and a display screen. It lets you control the output of the subwoofer when it is connected to the radio’s preamp output.
Key Features :
- IPX6 marine in-dash receiver and weatherproof pair of jet ski speakers.
- Bluetooth, 3.5mm AUX input, USB charging port, AM/FM radio with RDS tuner.
- Preamp outputs for system expansion, 6.5-inch poly cone speakers with rubber surrounds.
- Max per pair power output 180 watts, RMS power 90 watts, EQ settings, subwoofer control.
BOSS Audio Systems MCKGB450B.6 Weatherproof Jet Ski Speaker System
The MCKGB450B.6 is a marine-rated jet ski sound system comprising of a receiver and a pair of speakers. The receiver has an IPX6 waterproof and splashproof body. It has a peak power output of 60 watts x 4. The controlling unit has soft push buttons, preset EQ settings and a display screen. It also has a pair of switchable front and rear preamp outputs for plugging in additional devices such as subwoofers and amps.
The system has Bluetooth and auxiliary wired input facility. It works with all iOS and Android gadgets like smart phones, iPhones, iPods and tablets. The aux input supports MP3 players. A USB port is available for playing songs via USB flash drives. The port can be used to charge small devices like phones too.
The MCKGB450B.6 has AM/FM radio with a switchable RDS tuner. However, it does not support CD players and DVD players. Each of the two speakers is built with a 6.5-inch full-range polycarbon cone woofer with rubber surrounds. It has a UV-resistant basket measuring 4.5 inches in width, 3.25 inches in length and 4.5 inches in height. The outer plastic has a special coating to guard against UV radiation. The circuit boards and connection terminals have anti-corrosion coatings.
Key Features :
- Pair of weatherproof 6.5-inch speakers + IPX6 jet ski stereo.
- Bluetooth, 3.5mm aux input, USB flash drive reader, USB charging port.
- AM/FM radio with switchable RDS tuner, polycabon woofer, rubber surrounds.
- UV-coated basket, corrosion-resistant circuits and terminals, preset built-in EQ, preamp outputs.
Pyle PLMR67B 6.5-inch Weatherproof Jet Ski Speaker System
The Pyle PLMR67B is a pair of component speakers with water-resistant construction. It is designed for boats, jet skies, yachts, off-road vehicles, cars and trucks. Each unit has a 6.5-inch polypropylene cone woofer and a ½-inch dome tweeter. It has a cloth surround, a 1-inch aluminum voice coil and a 20 Oz circuit magnet.
The basket and grille are made of molded ABS plastic for greater durability. It has a total diameter of 7.09 inches, a cut-out diameter of 5.31 inches and a mounting depth of 2.48 inches. The speakers need to be hooked to a receiver for power and input. They can handle a max power of 120 watts and an RMS power of 60 watts as a pair. They have a frequency response of 45Hz to 16kHz and impedance of 4 ohms. The PLMR67B has a universal standard OEM replacement size and comes with all the necessary mounting hardware and wiring harnesses.
Key Features :
- Marine-rated pair of jet ski speakers.
- 5-inch polypropylene cone woofer, ½-inch dome tweeter.
- Cloth surround, 1-inch aluminum voice coil, 20 Oz circuit magnet.
- Peak power 120 watts (pair), RMS power 60 watts, universal standard OEM replacement size.
GoHawk AR4-Halo 4-inch all-in-one jet ski speaker and radio package
The GoHawk AR4-Halo consists of a pair of 4-inch amplified stereo speakers and a wireless remote control. It does not have a separate receiver but has all the inputs and wires attached to the master speaker. A braided sleeve attached to this speaker contains an auxiliary input port, a Bluetooth antenna, a 45-inch speaker connector, a power cord and a 12-inch USB female input. The USB female port supports USB flash drives for MP3 audio input as well as charges small gadgets like phones.
The slave speaker has a 27-inch speaker connector. The GoHawk AR4-Halo includes a 39-inch AUX audio cable and a 55-inch battery harness with ring terminal connector. It works with all 12 volt applications. Rated power is 10 watts x 2 and rated impedance is 4-8 ohms. Max power is 100 watts.
The gadget has an innovative mounting design and comes with a mirror hole mounting plate and a handlebar mounting clamp that fits 7/8-inch to 1 ¼-inch bars. The mounts are suitable for motorcycles, ATVs, jet skies and boats. The AR4-Halo has 3 input modes: Bluetooth, AUX and USB. The remote control has all the buttons necessary for managing volume, playback and input selection. The speaker baskets have a white halo LED light ring around it. It is switchable and you can turn it on/off as you like.
Key Features :
- Pair of 4-inch amplified jet ski speakers with wireless remote.
- Bluetooth, 3.5mm aux, USB flash drive input, USB charging port.
- White halo LED light ring, rated power 10 watts x 2, max power 100 watts.
- Mirror hole mounting plate, handlebar mounting clamp fits 7/8-inch to 1 ¼-inch bars.
Herdio 4-inch Jet Ski Sound System with Digital Bluetooth Amplifier Box
The Herdio jet ski speaker system comprises of a stereo receiver with a built-in amp and a pair of weatherproof speakers. Each of the speakers features a 4-inch 2-way full-range driver and a PEI dome tweeter. They are protected by a rust-poof grille and a heavy-duty engineered plastic cabinet. The system has Bluetooth Audio Streaming and a wireless range of 20 meters. It has a 3.5mm AUX input jack for MP3 players. Max power output is 100 watts and frequency response is 65Hz to 20kHz. It works with all 12 volt applications. We already reviewed this product under golf cart speakers and you may check the details from there.
KICKER 45KM84L Marine Jet Ski Sound System
The KICKER 45KM84L is a powerful 600-watt jet ski speaker system. It consists of a pair of 8-inch weatherproof marine speakers with stainless steel mounting hardware. The enclosures are made of high-quality 6061 aircraft-grade aluminum with a smart black powder finish. They are tolerant to water and salt, and do not have any exposed wired or terminals.
The 45KM84L are coaxial speakers. Each speaker is fitted with an 8-inch Polypropylene woofer with UV-coating, a 1-inch Titanium tweeter, a 4-ohm voice coil and a Santoprene surround. The polymer basket has a layer of anti-UV coating and the speaker grilles are resistant to corrosion. One grille is white and the other charcoal.
The speakers have a sealed motor structure. They have eye-catching 7-color built-in LED lights. The mounting gear is made of stainless less steel for longer life. Mounting depth of the speaker is 3.75-inches and mounting diameter is 6.7-inches. The KICKER 45KM84L needs to be connected to a power source such as a receiver. It works best with 150 watts recommended power. Peak power handling per speaker is 300 watts and RMS power per speaker is 150 watts. Frequency response of the system is 30Hz to 21kHz, rated impedance is 4 ohms and sensitivity is 92 dB.
Key Features :
- Pair of coaxial jet ski speakers with 7-color LED lights.
- 300-watts x 2 peak power, 150 watts x 2 RMS power, stainless steel mounting hardware.
- 8-inch polypropylene cone, 1-inch titanium tweeter, Santoprene surrounds.
- 4-ohm voice coil, aircraft-grade aluminum basket, sealed motor structure.
Pyle PLMRKT9 Bluetooth Marine-Grade Flush-Mount 2-way Jet Ski Speaker System
The Pyle PLMRKT9 is a waterproof flush-mount jet ski sound system. It comprises of a pair of 2-way speakers and a radio head-unit. The radio has touch-sensitive digital controls and LED connection indicators. The gadget has Bluetooth Audio Streaming and is compatible with Spotify and Pandora. A 3.5mm AUX input is available for MP3 players.
Each of the speakers is fitted with a 6.5-inch full-range driver made of reinforced polypropylene cone with a suspension cloth surround. They have a compact flush mount design suitable for in-wall and in-ceiling installation. They can also be mounted to pre-cut speaker openings or pre-made speaker enclosures.
You can use the system not just on your jet ski but also on your pontoon boat, yacht, car or patio. Mounting hardware and necessary cables are included. The Pyle PLMRKT9 is IPX5-rated water-resistant which means it can stand up to mild water splashes but must not be subjected to high-pressure water jets. Peak power output is 120 watts x 2 @ 4 ohms and RMS power output is 60 watts x 2 @ 4 ohms. Frequency response is 20Hz to 25kHz, TDH is <1% and S/N ratio is >95%. Cut-out diameter of each speaker is 5.2 inches and cut-out depth is 2.4 inches.
Key Features :
- IPX5 6.5-inch 2-way flush mount jet ski speakers + receiver with built-in amp.
- Touch control digital buttons, LED connection indicator lights.
- Bluetooth, 3.5mm AUX input, polypropylene cones with cloth surrounds.
- Max power 120 watts x 2 @ 4 ohms, RMS power 60 watts x 2 @ 4 ohms.
Rockville DWB65B Dual 6.5-inch 600-watt Tower Speaker for ATV/Jet Ski
The next product on our list is the Rockville DWB65B. It is a pair of marine wake tower speakers for jet ski and ATVs. It comes with a 50-foot spool marine-grade 14 AWG speaker wire (Rockville R14G50MS-BK). Each speaker is equipped with a 6.5-inch long-excursion polypropylene woofer and a 1-inch titanium tweeter. It has a 10 oz magnet, a high BL magnet motor structure and an oversized 1.25-inch Kapton voice coil.
The Rockville DWB65B can handle a peak power of 600 watts and a continuous power of 300 watts. It has a built-in 2-way crossover network. It has molded ABS plastic baskets that are waterproof and shockproof. The surrounds are made of rubber which lowers distortion and also increases durability as rubber is waterproof. All terminals are sealed with rubber gaskets.
The DWB65B has a new and improved nylon mounting bracket with a 360 degree rotating mechanism. The bracket has a special anti-UV coating to guard against sun exposure. Plus, there are rubber fitments which ensure a tight grip on the wake towers and roll cage bars with a diameter between 1.26 to 2.05 inches. The device needs to be hook up to a receiver for power and input.
Key Features :
- Dual 6.5-inch wake tower speakers for jet ski and UTV.
- Max power 600 watts, RMS power 300 watts, built-in 2-way crossover.
- Adjustable nylon mounting bracket with 360ᵒ rotation.
- Includes one 50-foot spool marine-grade 14 AWG speaker wire.
Seismic Audio SA-MS65B Jet Ski Speaker System
The Seismic Audio SA-MS65B consists of a pair of 6.5-inch marine-rated speakers with a 2-way configuration. They have CEA-compliant RMS power of 100 watts and max power of 400 watts. Total power of the pair is 800 watts and SPL is 91 dB. Frequency response is 55Hz to 20kHz and impedance is 4 ohms.
The SA-MS65B speakers have waterproof, saltproof and UV-resistant housings made of heavy-duty molded ABS plastic. Each unit houses a 6.5-inch polypropylene cone woofer and a 1-inch titanium tweeter. It also has a ferrite magnet and a 1-inch voice coil. All speaker terminals are made of stainless steel to ward off rust. Diameter of a speaker is 7.5 inches and height is 3.8 inches. Cut-out diameter is 5.4 inches and cut-out depth is 2.5 inches.
Mounting hardware is included in the package. The pair needs a radio for music input and power. It works with all boat audio systems. If you are looking for a replacement for your existing marine speakers or if you want to upgrade them, the SA-MS65B would be a good option.
Key Features :
- Dual 6.5-inch 2-way marine-grade jet ski speakers.
- CEA-compliant RMS power 100 watts, max power 400 watts.
- 5-inch polypropylene woofer, 1-inch titanium tweeter, ferrite magnet, 1-inch voice coil.
- UV-resistant ABS enclosure, stainless steel terminals.