Subwoofers are an indispensable part of car audio systems. They make the music deeper, beefier and fuller. If you are looking to create a premium sound system for your car, we suggest you consider adding a car subwoofer to the system. It will elevate the low-end frequencies to offer you a heart-thumping listening experience.
In this article we are going to introduce you to some of the best car subwoofers in the market. Among the top brands making car subwoofers are JL Audio, Rockford Fosgate, Orion, MTX Audio, Skar Audio, Rockville, Kicker, CT Sounds, Kenwood, Boss Audio, JBL and Pioneer. We have picked up the finest models from these brands and explained their features so you know their uses.
Best Car Subwoofer To Boost Your Car Audio Experience :
For quick reference to the best car subwoofers you can check the following comparison table.
Skar Audio EVL-10 D2 10-inch Car Subwoofer :
Skar Audio EVL-10 tops our list for best car subwoofer. It is a 10-inch dual 2-ohm subwoofer. It has a peak power handling of 2000 watts and a continuous power handling of 1000 watts. It is best suited for cars, trucks and RVs. The EVL-10 has outstanding low-end sound output. It is equipped with a large high-flux double stack ferrite motor structure. The motor is the key component as it enables the woofer to reproduce stunning low frequencies. The black coated 3-inch high-temp CCAW aluminum voice coil gives the sub an extra edge. The motor and the voice coil really kick up the performance of the woofer cone, especially when it is played for hours on end. The Skar Audio EVL-10 has a stitched high roll foam surround. This surround is instrumental in producing ultra-low bass with amazing responsiveness. The sub has a red single-damper two-layer spider. It connects with the voice coil former with premium stitched lead wires. The EVL-10 has a competition-grade pressed paper cone. It has a superior air flow cooling system that prevents overheating and keeps the internal parts cool. Frequency response of the subwoofer is 40 to 400 Hz and sensitivity is 82.1 dB. The motor weighs 166 oz. If you wish to mount the sub in a sealed enclosure, make sure the box has a volume of 1.25 to 1.50 cubic feet. If you want to go for a vented enclosure, it must have a volume of 1.75 to 2.00 cubic feet. The port area should be 22 square inches and the port length 19 inches. The subwoofer needs a mounting hole with a cut-out diameter of 9.375 inches and a mounting depth of 7.125 inches. Diameter of the magnet is 7.35 inches. Subwoofer displacement is 0.15 cubic feet.
Key Features :
- 10-inch dual 2-ohm car audio subwoofer.
- Max power 2000 watts, RMS power 1000 watts, pressed paper cone.
- Massive high-flux double stack ferrite motor structure, red single-damper two-layer spider.
- Black coated 3-inch high-temp CCAW aluminum voice coil, stitched high roll foam surround.
- Advanced air flow cooling system, frequency response 40 to 400 Hz.
Rockville W10K9D4 10-inch 3200-watt Car Subwoofer :
The Rockville W10K9D4 is a formidable 3200-watt car subwoofer. It belongs to the K9 Series of automobile subs by Rockville. It has a massive 10-inch dual voice coil 4-ohm woofer. It is perfect for large vehicles like trucks, RVs, SUVs and sedans. The Rockville W10K9D4 produces enormous bass output. It has a peak power handling of 3200 watts, program power handling of 1600 watts and RMS power handling of 800 watts. It has a pair of 4-layer 3 inch black aluminum voice coils wound with 100% copper wire. The CCAW wire is made in Japan. It is a high-quality wire, and it greatly enhances the cone’s performance and durability. The voice coil is stable up to 240 degrees. The voice coil windings are made in the US. The W10K9D4 car subwoofer has a double stacked 164 oz magnet and a pair of chrome-plated binding post terminals. The woofer basket is made of cast aluminum. It has a sophisticated black sanded finish. The cone itself is made of black non-pressed paper. It is extremely stiff and much thicker and sturdier than standard subwoofer cones. The nature of the cone allows it to handle more power without suffering any damage. It is ringed by a foam surround that reduces distortion and elevates the music. The red stitching cone reinforcement makes sure the sub has a long trouble-free service life. The dust cap is made from polypropylene. The T-yoke has a vent for faster cooling. The sub has custom-made rubber boot magnet covers. It guards the magnet and lends the subwoofer a smart look. The mounting gasket is also custom-built and helps secure the sub better. The W10K9D4 weighs 27.55 lbs. It has a frequency response of 33 Hz to 1.5 kHz and sensitivity of 83 dB. It has Nomex spiders that stand up to wear and tear for long-lasting use. The sub needs a mounting hole with a diameter of 9.37 inches and depth of 6.3 inches. If you are using a sealed sub enclosure, it must be 0.55 to 0.95 cubic feet in volume. If you are using a vented sub enclosure, it must have a volume of 1.2 to 1.8 cubic feet.
Key Features :
- 3200-watt peak power car subwoofer.
- 10-inch dual voice coil 4-ohm woofer, RMS power 800 watts.
- Non-pressed paper cone, two 3-inch 4-layer black aluminum voice coils wound with OFC wire.
- Double stacked 164 oz magnet, Nomex spider, cast aluminum basket, foam surround.
- Frequency response of 33 Hz to 1.5 kHz, requires a 9.37-inch (diameter) by 6.3 inch (depth) mounting hole.
Orion HCCA 122 Black Coil Series 12-inch Car Subwoofer :
The Orion HCCA 122 is a high-output car subwoofer. It has a maximum power handling of 5000 watts and RMS power 2500 watts. It generates enormous bass for large automobile applications. It is perfect for trucks, RVs, coaches, jeeps and SUVs. The Orion HCCA 122 is a 12-inch DVC voice coil 2-ohm car subwoofer. It has a durable 12-inch polypropylene cone woofer and polypropylene dust cap. Both the cone and the dust cap are UV and moisture-resistant. The device has a tri-radius symmetrical rubber surround and a pair of flat Conex spiders with loop stitched tinsel leads. The HCCA 122 has a high-temperature PAARC (Polyester Amide, Amide Resin Coated) voice coil. It is black and has a superior cooling system for rapid heat dissipation. It has dual 2-ohm copper wound voice coil on aluminum former. It has an aluminum frame and an 11mm steel front plate. The speaker has a sensitivity of 84 dB. It does not come with a grille. It needs a top-mount depth of 10.7 inches. The subwoofer can be mounted in a sealed enclosure or a vented one. If you are using a sealed enclosure, it must have a volume of 2.244 cubic feet. Its external dimensions must be 450mm (height), 697mm (width) and 297mm (depth). The thickness of the walls on the front and sides must be 25.4mm. If you are using a vented enclosure, the dimensions of the box will vary depending on the input amplifier power. For instance, if the input power is between 1200 and 2000 watts, the vented enclosure must have a volume of 3.07 cubic feet, but if the input power is more than 2000 watts, the recommended volume is 2.65 cubic feet. Similarly, the thickness, width, height and depth will differ from case to case. We suggest you refer the online product manual for further details.
Key Features :
- High-output competition subwoofer for automobile.
- 5000 watts max power handling, 2500 watts RMS power.
- 12-inch polypropylene cone woofer, black high-temperature PAARC voice coil.
- Tri-radius symmetrical rubber surround, two flat Conex spiders with loop stitched tinsel leads.
Rockford Fosgate P3D4-10 Punch Car Subwoofer :
The Rockford Fosgate P3D4-10 is another high-output automotive subwoofer. It is a rugged 10-inch dual 4-ohm subwoofer from the Punch P3 Series of subwoofers by Rockford Fosgate. The Punch Series subs are known for their parabolic cone design, extra-large surrounds and big motor assemblies. They deliver loud and deep bass, and have great aesthetics. The P3D4-10 has CEA-2031 industry certified power handling. It has a peak power output of 1000 watts and RMS power 500 watts. It handles power under continuous demand which protects the voice coil from damage. The device has a 10-inch anodized aluminum cone and dust cap. It has an anodized aluminum voice coil that can stand up to high-temperatures. The coil has a spun-laced Nomex reinforcement collar. The voice coil formers facilitate excellent heat dissipation and can withstand up to 100 degree Celsius when the device is playing at peak power. Aluminum acts as a heat-sink and allows for faster cooling than plastic alternatives. The sub has a diamond-cut cast aluminum trim ring. It has an extended pole piece and bumped vented back-plate. It has custom-built 10-AWG nickel-plated push terminals. It also has a PVC textured magnet cover that keeps the magnet safe. The Rockford Fosgate P3D4-10 car subwoofer has soft-touch rubber over-mold for slip-free grip. It has a hybrid stamp-cast basket with a built-in spider venting. The basket is super-strong, lightweight and durable. It is designed to lower resonance of the speaker. The P3D4-10 comes with a Flex Fit basket. The specialty of such a basket is that it uses slots wherever possible instead of screw holes. This lets you slightly adjust the subwoofer during installation making the mounting process a little more convenient. The subwoofer is built with Vertical Attach Surround Technique (VAST) which enlarges the radiating cone area by up to 25%. The device has multi-point stitched tinsel leads which reduce the mass of each lead. This helps spread stress and strain over a larger area which consequently enhances the reliability and bass output of the subwoofer. Diameter of the voice coil is 2.5 inches and magnet size is 78 oz. The sub needs a cut-out diameter of 9.125 inches and a mounting depth of 6.18 inches.
Key Features :
- 10-inch dual 4-ohm car subwoofer with CEA-2031 industry certified power handling.
- Peak power handling 1000 watts, RMS power 500 watts.
- Anodized aluminum cone, voice coil, dust cap, hybrid stamp-cast basket with spider venting.
- Vertical Attach Surround Technique, Flex Fit basket, multi-point stitched tinsel leads.
- Mounting hole diameter 9.125 inches and depth 6.18 inches.
BOSS Audio CXX8 Car Subwoofer :
The Boss Audio Chaos Exxtreme CXX8 is known for its stellar low-end bass reproduction. It has an 8-inch polypropylene cone that delivers consistently deep output. It has a resilient voice coil and durable surround for long-lasting speaker performance. The Boss Audio CXX8 is a good car subwoofer for hatchbacks, sedans and SUVs. It is designed to lift the bass effect of your existing car audio system. It is an 8-inch single voice coil 4-ohm subwoofer. It has a resonant frequency of 49 Hz and sensitivity of 83 dB (1 watt/1 meter). It has a peak power handling ability of 600 watts and RMS power 300 watts. The high-temperature voice coil ensures longer playing times and less weight. It has better fatigue properties and is able to operate well at high temperatures. The surround which connects the cone to the basket is made from high-quality butyl rubber which is chemically inert and impermeable to air. It absorbs a lot of the impact and abuse, and keeps the cone safe. The basket is a die-cast frame. It has better resonant frequencies, and absorbs and transfers much of the energy generated by the cone. It does not break, is corrosion-resistant and can withstand high temperatures. It also has good thermal and electrical conductivity. In fact, the entire speaker is designed in such a way that it is able to take constant handling abuse without suffering wear and tear. The Boss Audio CXX8 has a width of 8.25 inches, depth of 8.25 inches and height of 4.3 inches. It weighs 4.6 lbs. It has a mounting depth of 3.8 inches and a cut-out diameter of 7.25 inches. For installation in a sealed enclosure, required volume is 0.35 cubic feet; for vented enclosure, it is 0.6 cubic feet. The vent should be 3.5 inches and round. It should be 7-inch long and have a frequency of 52 Hz. Sealed enclosures are smaller than vented enclosures. They are easy to build and deliver tight bass. Vented enclosures have more SPL output. For better tuning ability in a vented box, we suggest you pair the sub with an amp that has a subsonic filter. Warranty period of the CXX8 is one year. It is extendable by two more years.
Key Features :
- 8-inch single voice coil 4-ohm car subwoofer.
- Polypropylene cone, butyl rubber surround, high-temperature voice coil.
- Peak power handling 600 watts, RMS power 300 watts.
- Needs 0.35 cubic feet sealed enclosure, 0.6 cubic feet ported enclosure.
- Mounting hole cut-out diameter 7.25 inches, cut-out depth 3.8 inches.
Skar Audio VVX-10v3 D4 10″ Car Subwoofer :
The Skar Audio VVX-10v3 D4 is one of the best subwoofers for cars. It is a 10-inch dual 4-ohm voice coil sub. It has a peak power output of 1200 watts and RMS power output of 600 watts. It pumps out ground-shaking bass for an extraordinary in-car music listening experience. The Skar Audio VVX-10v3 D4 is fitted with a durable competition-grade pressed 10-inch paper cone. It is attached to the basket using a high roll foam surround. The surround absorbs vibration and shields the cone from mechanical damage. The subwoofer has a dual 4-ohm 2.5-inch coil configuration. The coil is made from solid copper and can stand up to high temperatures. It handles enormous power to produce accurate bass so your tunes are realistic and deep. The device has a custom-built basket and an advanced cooling design. It has a double stack high-flux ferrite motor which works brilliantly with the copper voice coil. The VVX-10v3 D4 offers you the best of SQ and SPL sound. It has extremely precise bass reproduction no matter what the genre of the music. You get crystal clear low notes in all kinds of music playback. The Skar Audio car subwoofer has a frequency response of 40 Hz to 450 Hz and sensitivity of 85.4 dB. It can be mounted to a sealed or ported enclosure. Recommended sealed enclosure volume is 1.25 cubic feet and recommended ported enclosure volume is 1.75 cubic feet. The port area needs to be 19 square inches and the length of the port has to be 21 inches. Tuning frequency of the port must be 34 Hz. If you are carving out a mounting hole for the sub, the diameter of the cut-out must be 9.25 inches and the cut-out depth must be 6.9 inches. Magnet diameter of the device is 7.13 inches and subwoofer displacement is 0.15 cubic feet. Other specifications are as follows:- Fs: 33.7 Hz, Re: 3.8 Ohms, Qms: 6.60, Qes: 0.44, Qts: 0.41, Mms: 214.0 gr, Rms: 7.2 kg/s, Cms: 0.10 mm/N, Bl: 22.7 n/a, Vas: 17.4 L, Xmax: 15.5 mm. Warranty period of the product is 2 years.
Key Features :
- 10-inch dual 4-ohm voice coil car subwoofer.
- Competition-grade pressed 10-inch paper cone, dual 4-ohm 2.5-inch high-temp copper coil.
- High roll foam surround, custom-built basket, double stack high-flux ferrite motor.
- Frequency response of 40 Hz to 450 Hz, max power 1200 watts, RMS power 600watts.
- Works with 1.25 ft3 sealed enclosure and 1.75 ft3 vented enclosure.
CT Sounds Meso 8-Inch D2 Car Subwoofer :
Another reliable car subwoofer is the CT Sounds Meso 8-inch D2. It is an 8-inch dual 2-ohm voice coil sub. It generates a peak power output of 1600 watts and RMS power 800 watts. It can be installed in a sealed or ported enclosure. It is suitable for hatchbacks, sedans, trucks and SUVs. The Meso 8-inch D2 car subwoofer is built for long hours of high-power operation. It is fitted with an 8-inch woofer cone that pumps out loud and accurate bass. It has a 2.5-inch diameter voice coil which allows for greater power handling. The voice coil has two terminals for connecting with the amp. The device has a Y35-grade ferrite magnet which is one of the finest magnets you will find in audio systems. The magnet is housed inside a rugged protective case attached to the basket. Weight of the magnet is 160 oz. The Meso 8-Inch D2 has a strong arm-styled basket frame. It is designed to handle high amplifier input power for longer periods. It protects the cone and keeps the subwoofer in good working condition. If you want to mount the sub to a surface, you will need a cut-out diameter of 186mm and an overall diameter of 221mm. Mounting depth of the hole should be 168mm. If you plan to install it in a sealed box, it must have a volume of 0.3 cubic feet and if it is a vented box, it must have a volume of 0.5 to 0.75 cubic feet. Speaker displacement of the device is 0.08 cubic feet and coil inductance is 2.10mH. The gadget needs a 12 AWG gauge speaker connector. Other specifications are as follows:- BL: 12.392, FS: 50.850 Hz, QTS: 0.745, QES: 0.878, QMS: 4.922, VAS: 4.560 liters, SPL: 80.20 dB (@1w/1m), Xmax: ~15mm, Sd: 196.070 cm2. The product has a warranty of 90 days.
Key Features :
- 8-inch dual 2-ohm voice coil car subwoofer.
- Maximum power output 1600 watts, RMS power 800 watts.
- 5-inch diameter high-temperature voice coil, Y35-grade ferrite magnet.
- Arm-styled basket frame, protective magnet case.
- Works with 0.3 ft3 sealed box and 0.5 to 0.75 ft3 vented box.
- Cut-out diameter 186mm, cut-out depth 168mm.
CT Sounds Tropo D4 10-Inch Car Subwoofer :
One of the finest product on our list of top car audio subwoofers is the CT Sounds Tropo D4. It is a 10-inch dual 4-ohm voice coil sub. It has a peak power handling of 1200 watts and continuous power handling of 600 watts. It is perfect for hatchbacks, sedans and SUVs. The CT Sounds Tropo D4 delivers deep rumbling low-end frequencies. It is equipped with a 10-inch cone and a 2.5-inch voice coil. It has dual 4 ohm impedance. The voice coil makes the speaker very versatile. It enables it to operate at all levels of input power, consistently delivering great output. The Tropo D4 is a competition-level SPL-grade car audio subwoofer. It has a Y35 graded triple stacked ferrite magnet and a strong basket frame. The basket has a rugged build for protecting the inner acoustic driver. Mounting parameters of the device require the cut-out diameter to be 229mm and the mounting depth 150mm. Overall diameter of the installation should be 259mm. The subwoofer can be installed in a sealed or ported enclosure. Volume of the sealed enclosure should be 0.50 cubic feet and that of the ported one should be between 1.0 to 1.25 cubic feet. The sub needs a 12 gauge speaker connector wire. It has a speaker displacement of 0.10 cubic feet. Other specifications of the CT Sounds Tropo D4 are:- FS: 40.847 Hz, QTS: 0.502, QES: 0.579, QMS: 3.764, VAS: 13.660 liters, SPL: 83.9 dB (@1w/1m), Xmax: 12.5mm (Single way). The product has a 90-day limited period warranty.
Key Features :
- 10-inch dual 4-ohm voice coil car subwoofer.
- Peak power handling 1200 watts, RMS power handling 600 watts.
- 5-inch high-temperature voice coil, Y35 graded triple stacked ferrite magnet.
- Cut-out diameter 229mm, mounting depth 150mm, sturdy basket frame.
- Compatible with 0.50 ft3 sealed and 1.0 to 1.25 ft3 ported subwoofer enclosures.
JL Audio 10W0v3 10-inch Single 4-Ohm Car Subwoofer :
The last but not the least in this list is, JL Audio 10W0v3 car subwoofers. It belongs to the W0v3 Series of premium automotive subwoofers by the brand. It has a 10-inch subwoofer driver with outstanding excursion capability and linearity. It is best paired with an amplifier with a continuous (RMS) power output range of 75 to 300 watts. The JL Audio 10W0v3 is fitted with a 10-inch 4-ohm mineral-filled polypropylene cone. It has a foam surround and a single 2-inch voice coil. The polypropylene cone resists flexing, the foam surround absorbs impact and abuse, and the voice coil drives the woofer more accurately for superior bass reproduction. The 10W0v3 has a frequency range of 25 Hz to 250 Hz and sensitivity of 84.07 dB. It is built with JL Audio’s patented motor technology, Dynamic Motor Analysis (DMA) system. It has a DMA optimized motor that is extremely linear, stable and dynamic. The cone has an Elevated Frame Cooling system. This technology delivers cool air directly to the voice coil through tiny slots above the top plate for faster heat dissipation. It improves power handling and sound quality by lowering power compression and dynamic parameter shifts. The sub has an RMS power handling of 300 watts and nominal impedance of 4 ohm. Recommended amplifier RMS power is 75 to 300 watts. For best results, we suggest you go for a mono amp with an RMS power of 225 to 450 watts @ 4 Ohm. The 10W0v3 weighs 7.50 lbs. It needs a mounting hole with a diameter of 230mm and a depth of 124mm. It has a bolt hole circle diameter of 246.4mm and a motor outer diameter of 128mm. The JL Audio car subwoofer is designed to fit a 0.65 cubic feet (18.4 liter) sealed enclosure or a 1.125 cubic feet (31.9 liter) ported enclosure. If you plan to go for a sealed enclosure, make sure it has an external width of 18 inches, height of 11 inches and depth of 9 inches. If you want a ported enclosure, it must be 23 inches wide, 12 inches high and 13.625 inches deep. Grille is not included and has to be bought separately. The subwoofer has a warranty of one year. It is suitable for all kinds of sedans, SUVs and trucks.
Key Features :
- 10-inch single voice coil 4-ohm car subwoofer.
- Mineral-filled polypropylene cone, foam surround, 2-inch voice coil.
- DMA optimized motor, Elevated Frame Cooling system, frequency range 25 Hz to 250 Hz.
- Suggested amplifier RMS power 75 to 300 watts, fits 0.65 ft3 sealed and 1.125 ft3 vented enclosures.
[hr]
Check these UTV speakers and motorcycle speaker systems, if you are an adventure freak.
[hr]
Nice sharing for how to do the install a subwoofer, amplifier and enclosure on the car or vehicle right location to perfect setting. It is a very helpful post for those who want to fix a subwoofer on their rider location.
Thanks Anny. We loved that you liked our post.
Thanks Anny. We are happy that you liked it.
Here has incredible post for detailing car subwoofers. Thanks for all the suggestions.
Nice sharing for how to install a subwoofer, amplifier and enclosure on the car or vehicle right location to perfect setting. It is a very helpful post for those who want to fix a subwoofer on their rider location.
You are kept very helpful to share about subwoofers, it is also demantable post for those who want to upgrade their old subwoofer. Thanks for the post.
Thank you Claire.